|
AV4051 series spectrum analyzer
Overviews:
AV4051 series spectrum analyzer has the advantages of broad
bandwidth, high solution, high dynamic range, high precision, low
phase noise and fast measurement speed.
AV4051 has a wide range of applications as follows: aviation,
aerospace, communication, radar and navigation.
200MHz analysis bandwidth
(1) Flexible Bandwidth to choose from 10Hz to 200MHz;
(2) 10MHz standard analysis bandwidth (40MHz/200MHz, options);
(3) 64M sample memory depth (256M, options);
(4) Seamless capture time can be up to a few hours from 1.28
seconds.
Excellent testing performance
(1) The best measurement sensitivity: -152dBm/Hz;
(2) Measurement sensitivity at 50Hz: -127dBm/Hz;
(3) Phase noise: -115dBc/Hz carrier 1GHz @ 10kHz offset;
(4) All digital IF design.
Full spectrum analysis
(1) Continuous scanning and FFT step scan;
(2) Fastest sweep time of zero scan: 1μs;
(3) Counting Resolution: 1mHz;
(4) Scan Points: 101~30001;
(5) Up to six tracks;
(6) 6 kinds of detection methods, three kinds of average type;
(7) Support time gate measurement;
(8) Occupied bandwidth, channel power, adjacent channel power
testing;
(9) Statistical power, burst power, harmonic distortion, third-order inter modulation, spurious emission testing.
Specification
Model | AV4051 | AV4051A/AV4051B/AV4051C/AV4051D/AV4051E/AV4051F/AV4051G |
Frequency range | 3Hz~40GHz | 3Hz~4GHz/8GHz/13.2GHz/18GHz/26.5GHz/45GHz/50GHz |
10MHz | Frequency accuracy: ±(last calibration data× aging rate+temperature
stability+calibration accuracy) | |
Frequency readout accuracy (sweep) | ±(readout× frequency reference error+0.25% span+5% resolution
bandwidth+2Hz+0.5 horizontal resolution) | |
Frequency | ±(Frequency read out× frequency reference error+0.1Hz) | |
Bandwidth | Range:0Hz, 10Hz~4GHz/8GHz/13.2GHz/18GHz/26.5GHz/45GHz/50GHz | |
Sweep time | (Bandwidth ≥10Hz): 1ms~4000s | |
Resolution bandwidth | Range: 1Hz~3MHz (10% step),4,5,6,8MHz | |
Video bandwidth | 1Hz~3MHz (10% step),4,5,6,8MHz | |
Signal analysis Bandwidth | 10Hz~10MHz | |
Memory depth | 64MSamples(extend 256MSamples) | |
Trigger | Free, power, video, external level (front panel), external level (rear panel), burst power | |
Detection type | Normal, positive peak, negative peak, sampling, average, root mean square | |
Average type | Video average, Power average, Voltage average | |
Sideband noise | < -91dBc/Hz 100Hz | |
Residual FM | < 1Hz ×N(N is harmonic number) | |
Average noise level | -140dBm/Hz 10MHz~200MHz | |
Frequency response and absolute amplitude accuracy(10dB
attenuation, | Frequency response: | |
1dB gain compression point | 0dBm 20MHz~4GHz | |
TOI distortion | < -84dBc 10MHz ~ 4GHz | |
Remaining response | < -90dBm 1MHz~50GHz | |
Test speed | Local measurement update rate:90 times/sec | |
Dimensions | width× height× depth= 498mm×192mm×532mm (Including handles, feet,
foot) | |
Weight | About 25kg | |
Input connector | AV4051/AV4051F/AV4051G:2.4mm(male),impedance 50ohm; |
Flexible analog and digital output interface
(1) 10MHz~140MHz variable IF output;
(2) Demodulated output, support AM / FM demodulation and IQ
demodulation;
(3) Detection output, the output video signal scanning synchronization;
(4) Digital signal output,1X or 4X fiber output channel, provides
broadband IQ data of real-time recording from the interface;
(5) External 1.5TB~12TB data logger, SSD and HDD two media types.
![]() |
Portable Spectrum Analyzer 200MHz Analysis Bandwidth Plentiful Function Option Images |