AV36580A Vector Network Analyzer
AV36580A Vector Network Analyzer is a new generation of products
and also an update product based on many years of scientific
research and production experience in vector network analyzer.
Compared with the former generation, it improves much in measuring
speed, dynamic range and measurement stability. In terms of
hardware, brand-new technology has upgraded key performance indexes
(KPI) of complete machine much better than before; in terms of
software, embedded computer system (ECS) with Pentium chip and
Windows operating system have greatly improved interconnectivity
and easy use of complete machine.
ο As high as 90ms measuring speed (at sweep points: 201, IF
bandwidth: 30 kHz, display update status: ON) will greatly improve
the efficiency of production and scientific research.
ο 75Ω test port impedance option is available for measuring cable
ο Trace noise of 0.005dB renders the network analyzer a higher
ο One-button operation can greatly simplify the setup procedures to
improve work efficiency.
ο Provides as many as 64 independent measurement channels and
quickly executes complex test plan.
ο With as many as 32 display windows and each window displays 8
traced curves simultaneously.
ο With time domain analysis function.
ο With LAN, USB, GPIB, standard parallel interface and VGA display
ο Various display formats, such as amplitude, phase, group delay,
Smith chart, polar coordinates and standing-wave ratio (SWR), etc.
ο Windows XP operating system.
ο 8.4 inch true color high resolution LCD, simultaneous
multi-window and multi-channel display.
ο With 115dB dynamic range that enables it to make an accurate
measurement of high suppression filter
ο Multi-window and multi-channel measurement display
It provides as many as 32 windows and 64 channels (four traces per
channel), and can speed up the test procedure without calling the
state of instrument for several times and allow observation of all
four S-parameters of two-port component simultaneously.
ο Automated testing
Automated testing can save considerable time in the process of
testing and can also low testing cost by taking advantages of
flexible automated environment:
ο Finish automated testing by using SCPI command to control vector
ο Execute code directly from vector network analyzer or external PC
through LAN or GPIB interface.
ο Data store, communications and print AV36580A Vector Network
Analyzer contains hard disk of large capacity and is with several
communicating functions such as standard parallel interface and
USB, etc., so that all kinds of stored testing curves in the
analyzer can be stored in various forms or transmitted with
computers and can be also directly printed out.
ο GPIB interface
AV36580A Vector Network Analyzer, providing a D-type female GP-IB
connector with 24 pins, meets IEEE-488 standard and is used to send
and receive GP-IB/SCPI command.
ο USB transmission
AV36580A Vector Network Analyzer, providing 6 fast USB interfaces,
is convenient to connect with keyboard, mouse, printer, electronic
calibrator and other peripheral equipment which has USB interface.
ο Parallel interface communications
AV36580A Vector Network Analyzer, with standard 25-chip parallel
communications interface, can conveniently communicate with
computers and connect with parallel interface printer through
parallel interface communication cable.
ο Print function
AV36580A Vector Network Analyzer provides powerful print function
and can print the measuring display out or to the designated
document through the printer. Without limitations of local or
network printers and parallel interface, LAN or USB interface
printers, it can realize measurement print just by adding a printer
in Windows XP operating system.
Main indexes of AV36580A Vector Network Analyzer
Test condition of indexes: the vector network analyzer has been
warm up for over 90 minutes after starting at ambient temperature:
23℃±3℃ with temperature variation after calibration less than 1℃.
Calibration kit: AV20201 N-type calibration kit. Calibrating cable:
Port Output Power
Options: -85∼ +10dBm
1Hz ∼ 100kHz
System Dynamic Range
IF Bandwidth 10Hz
95dB (0.3∼ 10MHz)
115dB (10MHz∼ 3GHz)
IF Bandwidth 3kHz
Test Port Indexes
Effective Directivity (dB)
Effective Source Match (dB)
Effective Load Match (dB)
90ms (at sweep points: 201, IF bandwidth: 30kHz, display update
800×600, 8.4 inches true color LCD
GPIB, parallel interface, USB interface, LAN interface, VGA display
AC 220V±10%, 50Hz±5%;
AC 110V±10%, 60Hz±5%
Meet the requirements of Article 126.96.36.199 in GJB3947-2000.
Operating temperature range: 0 ℃ ∼ +40 ℃
Storage temperature range: -20 ℃ ∼ +70 ℃
Main unit: AV36580A Vector Network Analyzer
N-type calibration kit
3.5mm calibration kit
N-type testing cable
N-type testing cable
N-type 75Ω calibration kit
N-type 75Ω testing cable